Skip to content Skip to sidebar Skip to footer

How to use QPST Flashtool

QPST tool download can be used by a wide range of devices from various manufacturers to easily flash firmware files. It simply as to download the possible latest firmware and flash on the needed device. So as long as you are owning a Qualcomm device from Smartphones to Tablets powered Qualcomm chipsets, you are allowed QPST Flash Tool Download. And this is all the instruction manuals for it.

Use QPST Flashtool

  1. Download and Install Qualcomm USB Driver on your Computer. If in case Qualcomm Driver are already installed on your computer then SKIP this step.
  2. Download and install QPST Tool on your Computer. Once QPST Tool is installed on the computer, Go to: C:\Program Files\Qualcomm\QPST\bin\ folder. There, you will be able to see the following files:
  3. Now,Connect your Qualcomm Device to the Computer using the cable
  4. Now, Open ST Config
    How to use QPST Flashtool

  5. Once QPST Configuration is Launched, Click on the Port Menu
  6. Now, Click on the Starts Clients Menu and Select Software Download
    How to use QPST Flashtool

  7. Now, You will be able to see the QPST Software Download Dialog Box.
  8. Now, Click on the Phone Image Browse Button and Locate the Firmware (.hex) on your computer that you want to Flash on your Qualcomm Device (assuming you have already downloaded the firmware on the computer).
    How to use QPST Flashtool

  9. Now, Under the Boot Image, Click on the Browse button and locate the BOOT_LOADER.HEX file (comes with the firmware).
  10. Now, Click on the Start Button to begin the Flashing process.
    How to use QPST Flashtool

  11. Once Flashing is completed you will see the Green Bar at the end of Flashing.
  12. Now, Disconnect your Qualcomm device from the computer and Restart it.

Post a Comment for "How to use QPST Flashtool"